how to install turbo on honda accord

The Honda agreement is not the most performance-oriented vehicle on the market. To growth its performance, install a turbo kit on your Honda Accord. Installing a turbo kit on your agreement is the quickest mannerism to create some invincible skill and growth engine torque. However, installing a turbo kit on your agreement is along with one of the quickest ways to cause irreversible engine broken if you’re not careful approximately sure aspects of turbocharging, such as proper boost rule and tuning.

Remove the turbo kit from its packaging, and lay the parts out on the ground. create sure every the components are there.

Lift the agreement happening and place it on the jack stands.

Disconnect the exhaust pipe from the exhaust manifold. Normally there will be two or three bolts holding the exhaust pipe to the manifold. separate the bolts connecting the exhaust manifold to the engine block with a ratchet and separate the manifold.

Install the turbo onto the supplementary manifold using the hardware supplied with the kit. Be sure to install a gasket surrounded by the turbo and manifold.

Connect the exhaust manifold and turbo assembly to the engine with the supplied hardware. Tighten the nuts to the torque specification supplied with the turbo kit. be next to the supplementary exhaust pipe supplied with the turbo kit to the turbocharger, or fit a supplementary exhaust system manufactured by an exhaust shop.

Connect the oil feed cable supplied in the turbo kit to an oil source on the engine. The source is detailed on the turbo kit, but will typically be at the oil pressure sensor.

Remove the oil pan and take on it to a soldering iron which will solder a plug into it. This will be used for the oil reward line. Reinstall the oil pan and be next to the reward pedigree from the turbo to the oil pan.

Install the boost gauge (should have come with the kit) to monitor boost pressure. To attain this, route a vacuum pedigree from the vehicle cabin to the engine, and tap it lightly on a vacuum source on the intake manifold.

Reset the engine rule module appropriately that it adjusts the fuel and ignition timing to compensate for the supplementary freshen in the engine. Failure to conduct yourself this step will outcome in harsh engine damage.

Resetting the ECU is accomplished by purchasing a tuner and connecting it to the OBD harbor and after that with the steps final by the manufacturer. You can along with send your ECU to the company and they will send you a reset ECU.

Tips

Buy a turbo kit that includes anything you infatuation to install. Many turbo kits come incomplete, and require you to put the flaming of the system together. though this may be good for someone without difficulty experienced with turbochargers, it is not recommended for beginners. For final kits, check out turbo kits from Garrett or Greddy.

Warnings

Wear eye and skin protection.